MP-82 · MACHINING AND SEALS
Turning Speed and Feed
Calculate turning spindle speed and feed rate from entered cutting speed, work diameter, and feed per revolution.
Preliminary design support. Your inputs and results stay in this browser.
WHAT THIS SCREEN ANSWERS
Turning speed and feed must be tied to the actual tool, material, depth, and machine context. The page exposes rpm and feed-rate consequences from entered cutting speed, diameter, and feed per revolution. Start from the operating condition that makes this question consequential.
Insert geometry, workholding, rigidity, coolant, depth, chip control, power, finish, and machine limits can govern. Confirm toolmaker data, setup, work material, insert, depth, coolant, chip control, and machine limits. This is where a catalogue value alone can mislead.
Turning speed and feed must be tied to the actual tool, material, depth, and machine context. Insert geometry, workholding, rigidity, coolant, depth, chip control, power, finish, and machine limits can govern. A recalculation is meaningful only when the changed assumption is visible.
The page exposes rpm and feed-rate consequences from entered cutting speed, diameter, and feed per revolution. Confirm toolmaker data, setup, work material, insert, depth, coolant, chip control, and machine limits. The decision remains specific to this application because turning speed and feed must be tied to the actual tool, material, depth, and machine context. Ask the next question before treating the result as settled.